Paver sealing is one of the highest-value maintenance services you can invest in for a Fort Lauderdale property — and also one of the most misunderstood when it comes to pricing. Quotes vary dramatically between companies, and homeowners are often unsure what's included, what drives the price up, and whether they're being quoted fairly.
This guide breaks down exactly what professional paver sealing costs in Fort Lauderdale in 2026, what affects the price, and what to watch out for when getting quotes.
Paver Sealing Prices in Fort Lauderdale (2026)
| Service | Typical Range | Notes |
|---|---|---|
| Paver Sealing (clean + seal) | $2.50 – $5.00/sqft | Most common full-service package |
| Paver Cleaning Only | $1.50 – $3.00/sqft | Surface wash, no sealer applied |
| Full Paver Restoration | $4.00 – $7.00/sqft | Strip old sealer + clean + sand + reseal |
| Pool Deck Paver Sealing | $3.50 – $5.00/sqft | Includes pool-appropriate sealer selection |
| Driveway Paver Sealing (typical) | $800 – $2,500 | Based on driveway size, 300-700 sqft typical |
What's Included in a Professional Paver Sealing Job?
A legitimate paver sealing job is never just "spray sealer on pavers." A quality service includes several steps, each of which contributes to the final price:
1. Pre-Cleaning and Surface Preparation
This is the step most discount operations skip — and it's the most important. Applying sealer to dirty pavers locks in stains, algae, and efflorescence. The proper sequence starts with a thorough surface clean: professional surface cleaners at appropriate pressure, pre-treatment with degreasers for oil staining, and targeted treatment for efflorescence (the white mineral deposits common on Tremron and Belgard pavers in South Florida's high-humidity environment).
Allow dry time after cleaning before sealer application — typically 24-48 hours depending on temperature and humidity. Sealing wet pavers causes sealer failure, milky hazing, and trapped moisture under the coating.
2. Joint Sand Inspection and Repair
Paver joints filled with polymeric sand are one of the things sealer stabilizes and protects. But if the joint sand is eroded, washed out, or has weed growth rooted into it, that needs to be addressed before sealing. Topping up eroded joints with fresh polymeric sand, compacting it properly, and allowing it to cure is standard practice in a quality restoration job. Skipping this step means sealing over failing joints — which will continue to fail underneath the new sealer.
3. Sealer Selection and Application
The sealer itself typically represents 20-35% of the total job cost. Quality matters enormously here. Professional-grade sealers from manufacturers like Techniseal, Surebond, or Alliance Designer Products cost significantly more than box-store products and perform far better in South Florida's extreme UV and humidity. Proper application — two thin coats at the right coverage rate — is as important as the product selection.
What Drives Paver Sealing Prices Up or Down?
Square Footage
The single biggest factor. Larger areas cost less per square foot (efficiency gains on setup and equipment), while small jobs — a 200 sqft patio — often carry a minimum charge because mobilization costs are fixed regardless of size.
Condition of the Pavers
Pavers that haven't been cleaned or sealed in 5+ years require significantly more work. Heavy organic growth, deep embedded staining, significant joint sand erosion, efflorescence buildup, or failed sealer that needs to be stripped all add time and materials. A property that's been on a regular 2-3 year maintenance schedule takes far less prep and costs less per square foot.
Paver Type and Profile
Tumbled or textured pavers (like Tremron's Courtyard or Belgard's Cambridge Cobble) have more surface area and joint complexity than smooth-faced pavers, which can add to chemical consumption and application time. Natural stone pavers — travertine, marble, or limestone — require different sealers than manufactured concrete pavers, and often penetrating sealers rather than topical film-forming products.
Old Sealer Stripping
This is the biggest price driver for restoration jobs. If your pavers have existing sealer — especially if it's peeling, flaking, or has turned milky/white — that sealer must be stripped completely before resealing. Sealer strippers are expensive, slow to work, and labor-intensive to apply and neutralize. A full strip on a 1,000 sqft driveway can add $800-$1,500 to the job cost. But there's no shortcut: sealing over failing sealer just creates two layers of problems.
Accessibility and Layout
Open areas with clear equipment access are easier and faster to work. Tight spaces, steps, curved edges, and areas around pool equipment or landscaping features add labor time. Pool deck paver sealing often carries a slight premium for this reason — pool equipment, tight perimeters, and the need to protect the pool water from chemical overspray.
The Real Cost of Not Sealing
Unsealed pavers in Fort Lauderdale's climate face four accelerated deterioration processes:
- UV fading — South Florida sun bleaches paver color significantly within 2-3 years without UV-blocking sealer
- Staining — Oil, tannins from leaves and trees, fertilizer, and organic matter all penetrate unsealed pavers and become permanent
- Joint sand erosion — Rain and pressure washing gradually erode joint sand, allowing pavers to shift, rock, and create trip hazards
- Weed and ant colonization — Eroded joints become prime territory for weeds and fire ant colonies
A quality paver installation — Tremron, Belgard, or Artistic Pavers products — represents $15-$40+ per square foot installed. Protecting that investment with regular sealing every 2-3 years at $2.50-$5.00/sqft is straightforward math.
Getting an Accurate Quote
The only way to get a precise paver sealing quote for your Fort Lauderdale property is an on-site assessment. Pricing varies too much based on the specific factors above for any phone or website quote to be accurate. A professional contractor will measure your paver areas, assess the condition of the pavers and joint sand, evaluate any existing sealer, and provide a detailed scope of work with transparent pricing.
Be cautious of quotes that seem too low — they typically mean corners are being cut on prep, sealer quality, or application technique. All three lead to sealer failure, usually within 6-18 months.
Want an accurate paver sealing quote for your Fort Lauderdale property? Call Bentz Pressure Washing at (954) 235-9434 for a free on-site estimate.
Ready to schedule professional paver sealing for your Fort Lauderdale property?